SuperPro Front Upper Control Arm Complete Assembly Fixed Offset + Ball Joint +1.5° Caster for Nissan Navara and more

Fixed offset upper control arms with heavy-duty, high-articulation ball joints and SuperPro polyurethane bushings for 1 to 3 inch lifted vehicles.

The SuperPro fixed offset upper control arm (UCA) is a high-performance aftermarket component designed to enhance the wheel alignment of lifted 4x4 vehicles, resulting in reduced tire wear and improved overall performance. This UCA is constructed using high-strength steel forgings and tube steel, making it durable and reliable for heavy-duty use. The components are robot-welded, ensuring consistent and precise manufacturing standards.
The SuperPro fixed offset UCA features a heavy-duty high-articulation ball joint that enables the suspension to have greater articulation without binding, allowing for improved control and handling over rough terrain.
This UCA also includes SuperPro’s renowned polyurethane bushings, which offer superior resilience and durability compared to traditional rubber bushings. The polyurethane material is resistant to abrasion, wear, and chemicals, making it ideal for harsh off-road environments.

Upgrade your 4WD with a SuperPro 4x4 Control Arm! Gain extra clearance, articulation, correct alignment and install a stronger control arm designed for harsh off road conditions.

• Lifetime Warranty
• Enhances your 4WD's handling and performance
• Designed to solve alignment issues when you lift your 4WD
• Approved Nationally - VSB 14 Compliant (ADR compliant)
• High quality, form factor welding and assembly
• High grade Steel, for increased strength

For every inch a vehicle is raised the vehicles geometry is permanently changed, causing alignment issues. If a lift kit is installed, then a control arm should also be installed to solve alignment issues.

SuperPro's 4WD control arms are manufactured, tested and designed in Australia, ensuring high quality development and manufacturing with local reliable resources. SuperPro 4WD control arms are built to meet the high quality requirements set by SuperPro’s Q&A team; designed to outperform both competitor and OE products. Following our business motto ""Engineered to Outperform"", SuperPro exceeds many design expectations and has been certified as such.

 

Tech. Info:

Reference: TRC6540

Weight: 8.5

Note: Control Arm Upper Complete Assembly - Fixed Offset - Adds 1.5 degrees of caster and 0.5 degrees of negative camber over the OE UCA, Includes Ball Joint - Front Axle

 

 

Suitable for:

NISSAN NAVARA 2005-2015 | NAVARA D40 2WD
NISSAN NAVARA 2005-2015 | NAVARA D40 4WD
NISSAN NAVARA 2015-ON | NAVARA D23, NP300 DUAL CAB 2WD (COIL REAR)
NISSAN NAVARA 2015-ON | NAVARA D23, NP300 DUAL CAB 4WD (COIL REAR)
NISSAN NAVARA 2015-ON | NAVARA D23, NP300 SINGLE & KING CAB 2WD (LEAF REAR)
NISSAN NAVARA 2015-ON | NAVARA D23, NP300 SINGLE & KING CAB 4WD (LEAF REAR)
NISSAN NAVARA NP300 2015-ON | NAVARA D23, NP300 SINGLE & KING CAB 2WD (LEAF REAR)
NISSAN NAVARA NP300 2015-ON | NAVARA D23, NP300 SINGLE & KING CAB 4WD (LEAF REAR)
NISSAN PATHFINDER 2005-2013 | PATHFINDER R51