ПРОФЕСИОНАЛЕН СЪВЕТ
от 9 до 17ч
Няма продукти
*316 197
Set of intake manifold caps for Audi/Volkswagen/Porsche 4.2 V8 TDI engines
Нов продукт
137,80 лв. с ДДС1
Set of intake manifold caps for VAG 4.2 V8 TDI (no gasket and position limiter)
Set of intake manifold caps for Audi/Volkswagen/Porsche 4.2 V8 TDI engines
Изпратете на оператора на магазина въпрос за този продукт.
* задължителен
или Откажи
Уведомявай ме, когато е на склад
Set of intake manifold caps for VAG 4.2 V8 TDI (no gasket and position limiter)
За да бъдете информирани за съхранението на продукта чрез имейл, попълнете формуляра.
* задължително
или Отмени
RS-FLP_DEL011
Set of intake manifold caps for Audi/Volkswagen/Porsche 4.2 V8 TDI engines
The kit enabling the disassembly of swirl flaps in 4.2 V8 TDI engines consists of plugs made of the same material as the original swirl flaps and the intake manifold, additionally reinforced with glass fiber (PA66 GF35).
Swirl flaps are elements used in diesel engines whose main task is to introduce turbulence in the air flow into the combustion chamber in order to increase combustion efficiency. Unfortunately, these flip-flops have many disadvantages such as:
Application:
VAG 4.2 V8 TDI engines:
Audi
A8 D3 (4E2, 4E8)
4.2 TDI quattro (BMC) 4134ccm 320KM/235kW 2005/01-2005/06
4.2 TDI quattro (BVN) 4134ccm 326KM/240kW 2005/07-2010/ 07
A8 D4 (4H2, 4H8, 4HC, 4HL)
4.2 TDI quattro (CDSB) 4134ccm 351KM/258kW 2009/11-2014/04
4.2 TDI quattro (CTEC) 4134ccm 385KM/283kW 2013/10-2018/01
Q7 (4LB)
4 .2 TDI quattro (BTR) 4134ccm 326KM/240kW 2007/03-2009/06
4.2 TDI quattro (CCFA CCFC) 4134ccm 340KM/250kW 2009/05-2015/08
Q7 Van (4LB)
4.2 TDI quattro (BTR) 4134ccm 326KM /240kW 2007/03 -2009/06
4.2 TDI quattro (CCFA CCFC) 4134ccm 340KM/250kW 2007/03-2015/08
Porsche
CAYENNE (92A)
4.2 S Diesel (MCU.DB) 4134ccm 382KM/281kW 2012/10-
4.2 S Diesel (MCU.DC) ) 4134ccm 385KM/283kW 2014/10 -
Volkswagen
TOUAREG (7P5, 7P6)
4.2 V8 TDI (CKDA) 4134ccm 340KM/250kW 2010/01-2018/03
To avoid displaying an error on the dashboard, after installation, use a set of limiters (not included in this kit, available separately), or program the swirl flaps from the engine controller.
It should be possible to remove the following error codes with this repair kit:
P1018, 012597, P3135, P2008, P2011, 004120
The mentioned error codes are related to problems in the operation of the swirl flaps or their position sensors, which may lead to various irregularities, such as burning of the actuator motor or oil leak.
P2008 and P2011 refer to jammed swirl flaps in bank 1 or 2, and code 004120 indicates a problem with swirl flaps in bank 2. P1018 refers to an incorrect signal from the swirl flap position sensor in bank 1, while code 012597 indicates abnormalities in engine operation, which may be caused by, among others, jamming of the swirl flaps.
The P3135 code also concerns the swirl flap position sensor, which has not reached the required point, which can lead to various engine problems.
Set includes:
Technical specifications:
Plugs made of PA66 GF35, the same material as the intake collector and swirl flaps.
Perfect repeatability of dimensions.
The original design of the caps makes it impossible to turn the flaps or suck them into the combustion chamber.
материал | Алуминий;Plast |
Тази дискусия е специално предназначена за обмен на информация между клиентите. За въпроси относно вашата поръчка или наличност на склад, моля свържете се с нас директно.
Set of intake manifold caps for...